Group I – SN-350
PRODUCT DESCRIPTION
We are one of the leading producers of base oil SN350, is defined as a light grade base oil in the middle of the specifications of Grade I base oils. They are mainly used in lubricant and lubricant additives production. It has been solvent refined, dewaxed, and hydrogen treated to take out impurities. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.Uses of Base Oil SN 350
Base oils are used to manufacture products including motor oil, Industrial oil, Grease, and etc.
-General-purpose oils
-Mould oil
-Transmission fluids
-Gear oils
-Metalworking fluids
-Additives
-Hydraulic oils
-Transformer oils
Packing of Base Oil SN 350
Base oil packed in new or used 180 kg drums, iso tank, Flexitanks, and bulk shipments. Each 20-foot container takes 80 drums.
———————–
Group I – SN-500
PRODUCT DESCRIPTION
SN 500 is defined as a light grade base oil at the lower end of the specifications for Grade I light base oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining and dewaxing processes. To finish the refining it was hydrogen treated to clear out any impurities.
APPLICATIONS:
Engine oils
Transmission fluids
Gear oils
Metal working fluids
Greases
Hydraulic oils
Transformer oil
Packing: Drum, Flexi & Bulk
——————————
Group I – SN-150
PRODUCT DESCRIPTION
SN 150 is defined as a light grade base oil at the lower end of the specifications for Grade I light base oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining and dewaxing processes. To finish the refining it was hydrogen treated to clear out any impurities.
APPLICATIONS:
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Additives
Hydraulic oils
Transformer oils
Packing: Drum, Flexi & Bulk
——————————
Group II SN-150N
PRODUCT DESCRIPTION:
SN 150N is defined as a light grade base oil at the lower end of the specifications for Grade I light base
oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil which
has undergone solvent refining and dewaxing processes. To finish the refining it was hydrogen treated
to clear out any impurities.
APPLICATIONS:
2T and 4T engine oils
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Hydraulic oils
Transformer oils
Packing: Drum, Flexi & Bulk
——————————
Group II SN-200N
PRODUCT DESCRIPTION
SN 200N is defined as a light grade base oil at the lower end of the specifications for Grade I light base
oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil which
has undergone solvent refining and dewaxing processes. To finish the refining it was hydrogen treated
to clear out any impurities.
APPLICATIONS:
2T and 4T engine oils
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Hydraulic oils
Transformer oils
Packing: Drum, Flexi & Bulk
——————————
Group II SN-500N
PRODUCT DESCRIPTION :
SN 500N is a heavy GII base oil which is derived from refining of vacuum distillates of specific crude
oil fractions by dewaxing and hydro-processing. They are mainly used in lubricant production where
their typical parameters are used for specific products.
APPLICATIONS:
2T and 4T engine oils
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Hydraulic oils
Transformer oils
Packing: Drum, Flexi & Bulk
——————————
Group I SN-600N
PRODUCT DESCRIPTION
SN 600N is defined as a light grade base oil at the lower end of the specifications for Grade I light base
oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil which
has undergone solvent refining and dewaxing processes. To finish the refining it was hydrogen treated to clear out any impurities.
APPLICATIONS:
2T and 4T engine oils
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Hydraulic oils
Transformer oils
Packing: Drum, Flexi & Bulk
——————————
Recycle Base Oil – SN-150
PRODUCT DESCRIPTION
SN-150 is defined as a light grade base oil at the lower end of the specifications for Grade I light base
oils. They are mainly used in lubricant and lubricant additives production. It is a Group I base oil
(mineral based non-synthetic base oil) which is derived from rerefining used or lubricants contaminated
with particulate matter and other soluble materials.
APPLICATIONS:
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Additives
Packing: Drum, Flexi & Bulk
——————————
Recycle Base Oil – SN-150
PRODUCT DESCRIPTION
SN-300 is a defined as a light grade base oil and is a Grade I base oils. They are mainly used in
lubricant and lubricant additives production. It is a Group I base oil (mineral based non-synthetic base oil) which is derived from rerefining used or lubricants contaminated with particulate matter and other soluble materials.
APPLICATIONS:
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Additives
Packing: Drum, Flexi & Bulk
N-100, 100 Base oil
The N-100 base oil, and 100 base oil are received by hydrotreating distillates obtained from waste
lubricating oils
APPLICATION:
The N-100 and 100 base oils are used in the production of:
machine oils
hydraulic oils
technological oils ( for metal machining, forming and hardening )
maintenance oils
protective oils
anti-adhesive oils
anticaking solutions
——————————
N-80, 80 Base oil
The N-80 base oil, and 80 base oil are received by hydrotreating distillates obtained from waste
lubricating oils
APPLICATION:
The N-80 and 80 base oils are used in the production of:
machine oils
technological oils ( for metal machining, forming and hardening )
maintenance oils
protective oils
anti-adhesive oils
anticaking solutions
——————————
N-200, 200 Base oil
The N-200 base oil, and 200 base oil are received by hydrotreating distillates obtained from waste
lubricating oils
APPLICATION:
The N-200 and 200 base oils are used in the production of:
machine oils
hydraulic oils
engine and transmission oils for automatic transmissions
technological oils ( for metal machining, forming and hardening )
maintenance oils
protective oils
anti-adhesive oils
anticaking solutions
——————————
Group-III CST 8
PRODUCT DESCRIPTION
Group III base oils are subjected to the highest level of mineral oil refining of the base oil
groups. Although they are not chemically engineered, they offer good performance in a wide range of
attributes as well as good molecular uniformity and stability. They are commonly mixed with
additives and marketed as synthetic or semi-synthetic products because of this. Their viscosity
index is above 120 while the level of sulphur is below 0.03%.
APPLICATIONS:
CST 8 is a high-performance Group III base oil with good oxidation stability, low sulphur content,
high viscosity index and excellent low temperature fluidity. This line of products is widely used
as blending components in a variety of industrial and automotive lubricants, functional fluids and
can also be used as a VI improver for low viscosity index base oils.
Packing: Drum, Flexi & Bulk
——————————
Group-III CST 4
PRODUCT DESCRIPTION
Group III base oils are subjected to the highest level of mineral oil refining of the base oil
groups. Although they are not chemically engineered, they offer good performance in a wide range of
attributes as well as good molecular uniformity and stability. They are commonly mixed with
additives and marketed as synthetic or semi-synthetic products because of this. Their viscosity
index is above 120 while the level of sulphur is below 0.03%.
APPLICATIONS:
CST 4 is a high-performance Group III base oil with good oxidation stability, low sulphur content,
high viscosity index and excellent low temperature fluidity. This line of products is widely used
as blending components in a variety of industrial and automotive lubricants, functional fluids and
can also be used as a VI improver for low viscosity index base oils.
Packing: Drum, Flexi & Bulk
————————
Group-III CST 6
PRODUCT DESCRIPTION
Group III base oils are subjected to the highest level of mineral oil refining of the base oil
groups. Although they are not chemically engineered, they offer good performance in a wide range of
attributes as well as good molecular uniformity and stability. They are commonly mixed with
additives and marketed as synthetic or semi-synthetic products because of this. Their viscosity
index is above 120 while the level of sulphur is below 0.03%.
APPLICATIONS:
CST 6 is a high-performance Group III base oil with good oxidation stability, low sulphur content,
high viscosity index and excellent low temperature fluidity. This line of products is widely used
as blending components in a variety of industrial and automotive lubricants, functional fluids and
can also be used as a VI improver for low viscosity index base oils.
Packing: Drum, Flexi & Bulk
——————————
We also supply the following
Group II Base Oils
70N
150N
220N
500N
S600N